Anti vandal TV enclosure for protection.

Whilst young people are locked up due to breaking the law, their human rights still need to be considered, even if some of these ‘rights’ seem excessive, this article is not being written in defense of these youths, nor is it condoning their actions, but merely highlighting a suitable television protection enclosure for an LCD or plasma screen, which is allowed in such establishments for news and entertainment purposes.  The welfare of the remanded adolescences is also very important, as they may be mentally unbalanced and be intent on self harm, using a piece of smashed glass to injure themselves, or use the electrical wiring to form a ligature, from which to hang, so the logical and safe solution is to securely enclosure the whole kit within a protective anti vandal TV enclosure, which is also known as a Non-loop enclosure.

Use of anti vandal TV enclosure.

The locks for these anti vandal TV enclosures are especially designed to hold the screen and media player securely in situ, whilst giving the maximum viewing opportunity.  They are certainly more secure than the traditional Cam locks, other manufacturers or suppliers offer.  The viewing window, which is set within the frame of the door of the Non-loop enclosure in front of the plasma or LCD television screen, is made from a high quality polycarbonate sheet, which is virtually unbreakable and is shatterproof, therefore limiting the dangers of self harm, or accidental harm, to a minimum.

Alternatives to anti vandal TV enclosure solution.

When the cost of replacing a television screen is taken into consideration, enclosing it within an anti vandal TV enclosure may add an initial cost, but in the financial long run, it is value for money – how many television screens does a detention center go through in a year?  The specially designed shape of the Non-loop enclosure eliminates the dangers of prisoners harming themselves, as the sloping side will not hold any material with which to form a ligature.  There are no gaps between the wall and the television protection for material to be held.  As the television protection is totally enclosed, air is forced through the unit for cooling, so the audio has to be supplied via speakers placed flush within the walls or ceiling.

To limit the possible damaged to the hardware and expensive screens, it is wise and economical to install the screen within a housing unit especially designed to withstand accidental or deliberate damage, this is why an anti vandal TV enclosure is ideal for protecting TVs in hazardous areas.

LCD Enclosure Global Limited manufacture a range of protective LCD enclosures as well as producing anti vandal TV enclosure solutions.

LCD Enclosures Global Ltd explain.

Protecting the screen and hardware of an LCD digital signage package with an enclosure, is vital to ensuring its productivity.  Having spent a significant amount on all the components, one accidental incident to the screen can render the whole thing useless.  An LCD enclosure is a specifically designed metal box, with a viewing window which allows digital signage from a media player to be played as; information, data collection or entertainment.

Factory digital signage protection – LCD enclosures.

Most factory floors will run infomercials for its staff, in the forms of productivity targets, data collection statistics or health and safety notices.  All of which can be created as a highly visual animated video format and may also include audio, though this depends on the background noise level.  Clever content development is fundamental to a successful campaign.

LCD enclosures used in car parks, shopping malls and in factories.

LCD enclosures can be supplied in a range of sizes, all of which are measured by taking the measurement of the screen to be installed inside the enclosure – on the diagonal, for example the bottom right hand corner of the screen to the top of the left hand corner gives the size of the screen – not the horizontal measurement from left to right!  The screen is mounted to the back of the LCD enclosures, after the box is installed in situ, i.e. hung from a ceiling mount, fixed to a wall or floor standing.  Installing these LCD enclosures is a relatively simple process and involves drilling into a wall, plugging the hole with suitable rawl plugs and fixing in place with bolts, sometimes it is necessary to use anti-vandal bolts, depending on the location.  Then the screen can be fitted inside the LCD enclosure.  Most modern designs of LCD enclosures feature a removable door, with hinges which can be repositioned; this enables ease of installation of the screen, whilst adding maximum security.  An LCD enclosure comes supplied with weatherproof grommets, through which electrical power cables can be positioned for connection to power.

There are many benefits to installing these LCD enclosures on the shop floor; it keeps workers moral up as they feel they are being kept up to date with information, it acts as a reminder to health and safety issues, helping to reduce accidents and can even display simple information such as the daily menu of the canteen.

LCD Enclosure Global Limited manufacture various protective enclosures including their range of LCD enclosures.

LCD monitor enclosures.

LCD monitor enclosures are progressively being built-in industries and factories to guard the valuable and brittle LCD monitors in dangerous settings where, coolant, dust and hazards are commonly present. People in this modern world prefer to use a television set in their courtyard. With the growth of science and technology, the cost of Liquid crystal monitors has become economical and people also choose to use them in their homes. In order to protect the monitor in the physical sense, we make use of LCD monitor enclosures.

LCD monitor enclosures.

LCD monitor enclosures present the highest safety and security from burglary and possible damage and also offer protection from the basic earthly elements. Some of the producers of the outdoor enclosures vary greatly in the provisions they supply along with the cabinet. A few of them might provide temperature management of the enclosures, integrated with a heating and a cooling system. A range of temperature is set inside the enclosures to avoid overheating of the monitors and screens.

The main aim of the LCD monitor enclosures is to ensure that the TV doesn’t get spoiled when a calamity happens. Disasters are very frequent since kids often take pleasure in their sports in their garden. In such a situation, a ball might hit the screen of the TV box. The enclosure covers and protects the screen and prevents any damage that might occur to the display of the television monitor. A specially designed shelf is set with the enclosure which is coated with a reflective film material. This will help researchers and manufacturers to gauge the resistance effect of the window which is used to see the shows. The real challenge will be the setting up of the LCD monitor enclosures at perfect viewpoints to make sure that the digital screens don’t fall down and break down. Some manufacturers offer special enclosures that have a higher amount of robbery and ruffian defense. In such cases, these come with higher specific security devices, so that the LCD monitors can be placed at any location.

LCD Enclosure Global offer a range of protective cases including LCD monitor enclosures as well as their standard range of LCD enclosure.

Our outdoor LCD enclosure was primary designed and developed for the outdoor digital signage market, however more and more organisations are seeking to use large flat panel TV’s in manufacturing facilities – Why?

We all have need for information in this “must have it now” world, this is why digital signage in outdoor locations has taken off so well helped by the increase of aps from Apple and other mobile device vendors. But now companies see that they can use large TVs in manufacturing facilities to assist the production team in organising their day and monitoring production.

We all know that an outdoor LCD enclosure is perfect for protecting dynamic signage outdoors, especially with the protection from the climate and potential vandal risk, however a factory or manufacturing environment is a total different ball park, as there are many different types of hazards that will kill the screen just like a vandal hitting an unprotected screen with a baseball bat.

Factory use for our outdoor LCD enclosure.

When a business invests into a data capture solution for the factory production it is not entered into lightly, as the financial costs are high as well as the time and effort planning and deploying a system is also time consuming.

But installing a standard screen unprotected is foolish, this is why the sigma six team or manufacturing information system management team insist that the electronic hardware that is used in a factory is protected. The plant may use corrosive coolants in the production of their products such as in a steel plant, or the production floor may be cleaned every night or at the start of every shift by a mixture of chemical cleaner such as a diluted bleach and water, fed through a high pressure water jetting machine.

As you can see from these two examples, both are hostile and both will affect the internal components of the computer hardware, so by fitting the hardware into an LCD enclosure these provide protection from fluid and dust ingress as well as protecting the factory investment in the project.

LCD Enclosure Global have a vast knowledge and experience manufacturing protective enclosures, their range of LCD enclosure is supplied to many top level integrators throughout the world, for outdoor digital signage and at the same time to major manufacturing companies for factory information system protection.

For the most affordable solution in the market, contact us on 888 460 3573 toll free from the USA.

Monitor enclosures are used to protect monitors and larger LCD screens when they are used for factory information systems. Without these protective cases, the factory information system could be brought to its knees within minutes.

Factory information systems are a very visual part of manufacturing life, without them the large screens and monitors would vanish over night from our production facilities. These screens vary in size from 17” up to and including 65” LCD displays, these have a high investment cost within a project so the do need to be protected, from everything including dust, fluid, truck drivers and heat.

Imagine if you had invested $50,000 in a data collection system only to find that the screens go down and have to be placed within a matter of weeks of commissioning the system, this would not look good for the project managers. So one of the forms of attack is defence (we have all heard that – haven’t we?).

So the best form of defence would be put all monitors that are on the production line into monitor enclosures, these are designed to accommodate both the screen and either a small factor PC, thin client or media player, so all the content can be pulled form a source locally, this is why anyone installing SAP or SCADA look at monitor enclosures as important parts of the chain, without them the project is as useless as if it had no software.

With the reduction of use of CRT screens, the old PC enclosures are being decommissioned and being replaced with thin client enclosures, these too accommodate a flat panel screen and a small computer, however with more large screens being used, this makes using 60” displays a real option for the project team to make the production information system a part of the factory environment.

A monitor enclosure is relatively new to the factory floor and will certainly be around for a number of years before they are superseded.

LCD Enclosure Global manufacturer a range of monitor enclosures as well as their outdoor digital signage LCD enclosure.

LCD Enclosure Global – anything else is a compromise.

From SAP to SCADA every manufacturer is looking for an edge to save money, no matter if it is reducing wastage or informing employees of new contracts won, factory information systems are the way forward.

Manufacturers are very competitive as we all know, so when they are looking to improve their presence in the market place, their IT or Sigma Six team liaise to find the right solution, not the solutions range from computerising the factory floor, or implementing a factory information system, this can work well as well as providing information on the news of the employer, they can be used to highlight the employee of the month, this could be the person who has created the least wastage with the most production output.

So how does this work?

Well to display information to employees in an open large area these screens have to be large so a 60” screen is not uncommon. These can be mounted from the ceiling and either is in a single or double configuration. These can also be used to provide staff training, as the training can be loaded on a central server in the global head office, it is then scheduled for a particular time and staffs attend, before, during or after their shift.

Large companies with manufacturing facilities are looking to Six Sigma to provide a solution, so they are looking into large format LCD and plasma screens to display information to staff providing an informative factory information system.

Now if you want to display factory information, there are solutions out there that will not break the bank, a rugged LCD enclosure is perfect and is rather more cost effective than you may think, even a stainless steel LCD enclosure is perfect for any food environment, providing maximum protection with minimal maintenance.

LCD Enclosure Global offer a range of enclosures for the digital signage market as well as factory floors, a selection of their LCD enclosures have deplotyed in food manufacturers throughout the world including Canada, America and Australia.

For the most affordable price call 888-460-3573 toll free (US).

LCD Enclosure Global – anything else is a compromise.